Airspeed Products Suitable for Contractors

A comprehensive range of high performance coatings for the demanding requirements of industry, providing durable protective and decorative systems for the finishing of plant, machinery and the many diverse products of modern industry.
Airspeed 2 Pack Etch Primer A two pack etch primer providing adhesion to non ferrous surfaces such as zinc and aluminium and also to smooth ferrous substrates where high adhesion of the paint coating system is paramount.
Airspeed
Single Pack Etch
Primer		 A range of single pack etch primers for application to certain suitably prepared metallic substrates where high adhesion is required. AIRSPEED SINGLE PACK ETCH PRIMERS combine ease of application with rapid drying.
Airspeed QAD Zinc Phosphate A range of quick air drying zinc phosphate primers for the protection of iron and steelwork against corrosion, giving a tough quick drying primed substrate which may be overcoated with a wide range of single pack finishing systems.
Airspeed Universal High Build Primer Undercoat Single pack quick drying high build zinc phosphate primers for the protection of iron and steelwork against corrosion giving a tough primed substrate which may be overcoated with a wide range of single pack and certain two pack finishing systems.
Airspeed Brush/Spray Zinc Phosphate Primer A range of air drying high quality zinc phosphate metal primers for brush or spray application giving high protection to suitably prepared steelwork, plant, machinery etc. and which may be overcoated with suitable products from the AIRSPEED range.

Airspeed 257

A range of rapid drying finishing enamels allowing high volume product finishing with a high gloss finish. AIRSPEED 257 is primarily applied by spray application.
Airspeed 270 Tough durable, abrasion resistant single pack polyurethane finishing enamels for application by both brush and spray, for the finishing of plant, vehicles and machinery etc. AIRSPEED 270 also exhibits resistance to many oils, greases and mild chemicals. AIRSPEED 270 is based on mild solvents with a high flash point and does not contain isocyanates.
Airspeed 272
 A range of single pack QD polyurethane enamels for the finishing of plant, vehicles and machinery giving a 60 minute touch dry (at ambient temperature). Good gloss retention combined with rapid through drying and user friendly application properties allow for rapid premium quality finishing to be carried out giving a good appearance together with good weathering and durability.
Airspeed 400
 High build quick drying finishes with high durability, giving good builds with fast through dry properties, enabling high volume quality finishing to be achieved in a short space of time. AIRSPEED 400 is normally applied by spray application.

metal coatings, pdi paints, polychromatic enamel, polyurethane paint, red oxide paint, williams casco, zinc phosphate, intumescent coatings, heavy duty coatings, intumescent coating advice, industrial paints, liquid surface coatings, coatings for industry, casco coatings

airspeed primer, airspeed topcoat, anti corrosive primer, coatings for metal, crosbie casco, crosbie coatings, epoxy paint, epoxy primer, floor paint, identification coatings, industrial coatings, industrial metal primers, lacquers, metal coatings

Crosbie-Casco - We apply the most technologically advanced techniques to produce industrial coatings of superior quality. Crosbie coatings produce and supply an extensive range of general industrial coatings for a wide variety of uses. Coatings include identification coatings, intumescent coatings, polyurethance paint, airspeed primer & airspeed topcoat and pdi paints too. Williams Casco produce and supply high performance coatings for the protection of structural steel. Metal coatings include industrial metal primers, heavy duty coatings, anti corrosive primer, metal coatings, epoxy primer & epoxy paint and floor paint too. Our friendly staff are always ready to answer any enquiries you may have so contact us today!